Description
TH3318 is formulated with a variety of additives such as superior detergent, dispersant, antioxidate/ corrosion inhibitor, etc. The oil prepared from TH3318 possesses the properties of low ash, fine dispersibility and antioxidation, applicable to natural gas engine as well as gasoline engine.
Applications
|
API grade |
Treating rate (m%) | |
|
Mono-grade |
Multi-grade | |
|
SF |
6.0 |
6.8 |
|
SE |
4.5 |
5.0 |
Characteristics
|
Item |
Typical value |
Test method |
|
Density, kg/m3, at 20oC |
Report |
ASTM D1298 |
|
Flash point (COC), oC |
170 |
ASTM D92 |
|
Kinematic viscosity, mm2/s, at 100oC |
78 |
ASTM D445 |
|
Total base number, mgKOH/g |
73 |
ASTM D2896 |
|
Sulfate ash, mass% |
8.9 |
ASTM D874 |
|
Calcium, mass% |
1.62 |
ASTM D4927 |
|
Nitrogen, mass% |
0.95 |
GB/T3228 |
|
Phosphorus, mass% |
1.51 |
ASTM D1091 |
|
Zinc, mass% |
1.79 |
ASTM D4927 |
|
Mechanical impurities, mass% |
0.09 |
GB/T511 |
Packing,Transportation and Storage
1, The package is packed in metal drum of 200 litres. Avoid contacting with strong oxidizer.
2, Ambient temperature for storage should not exceed 50oC. Entering of water and impurities is strictly forbidden.
3, The packing, marking, transportation, storage and delivery acceptance should meet the requirement of SH/T0164.
Points for Attention
1, The package is a kind of functional additive package, applied by adding with antifoam agent.
2, The recommended temperature for blending of oil is 60-65oC.
3, The temperature of heating steam for transferring and blending should not exceed 110oC.